Russian
簡體中文How can the zeroing time interval of the J5000 ozone detector be modified?
Views :
Update time : 2025-07-03
How can the zeroing time interval of the J5000 ozone detector be modified?
How to modify the zeroing time of an ozone detector? Any detector will experience drift during detection. The purpose of zeroing is to minimize the error. Then, when we detect the concentration of the ozone generator, we need to set the zero calibration time according to the length of the detection time. How to set the zero calibration interval?
Related News
Read More >>
How can the zeroing time interval of the J5000 ozone detecto
07 .03.2025
J5000臭氧檢測儀如何修改校零時間間隔呢?臭氧檢測儀的校零時間如何修改，任何檢測儀在檢測時都會出現漂移，校零的目的就是將誤差減到小。那么我們在檢測臭氧發生器
How to set the ozone production function of the J5000 ozone
07 .03.2025
臭氧檢測儀臭氧產量功能如何設置？在3S-J5000臭氧檢測儀中，有一個功能是臭氧產量計算，但這個功能需要設置才可以使用，如何設置呢？臭氧產量公式中包含了進氣量和
How to select a UV ozone concentration detector?
07 .03.2025
紫外臭氧濃度檢測儀如何選型？紫外臭氧濃度檢測儀如何選型？一實驗室要進行臭氧實驗，需要測量臭氧發生器出口的臭氧濃度和臭氧尾氣濃度，計算臭氧利用率，臭氧檢測儀該如何
Precautions for connecting ozone generators and J5000 ozone
07 .03.2025
臭氧發生器和J5000臭氧檢測儀連接注意事項實驗用臭氧發生器和臭氧檢測儀連接注意事項，我們在使用的時候，可以看到只有檢測儀和臭氧發生器之間的管子使用的聚四氟乙烯